In PSA nitrogen generation systems, Carbon Molecular Sieve (CMS) is the core adsorbent material that directly determines nitrogen purity, output, energy consumption, and long-term equipment stability.

Many users focus only on the labeled purity during selection, while overlooking the key technical parameters that truly affect performance and cost-effectiveness.

This article uses measured data from three SHANLI CMS models (SLCMS-UEP, SLCMS-USP/H, SLUHP-100) to explain the meaning and importance of each parameter — helping you make a more informed selection decision.

 

1. Nitrogen Productivity — Determines Equipment Size & Initial Investment

What it means

• Under standard conditions (0.7MPa, 20°C), the nitrogen output per ton of CMS per hour (Nm³/hr·ton). 
• It is a core indicator of CMS adsorption capacity, reflecting oxygen adsorption strength per unit mass.

Why it matters

Higher productivity → less CMS required to achieve the same nitrogen output → smaller adsorption tower → lower equipment footprint and initial investment.

Reference data (at 99.99% nitrogen purity)

 

Model	Nitrogen Productivity (Nm³/hr·ton)
SLCMS-UEP	175
SLCMS-USP/H	160
SLUHP-100	148

 

SLCMS-UEP offers outstanding productivity, ideal for medium-to-large high-load nitrogen generation. SLUHP-100 has slightly lower productivity but delivers stable performance under ultra-high purity conditions.

 

2. Nitrogen Recovery Rate & Air/N₂ Ratio — Determine Energy Cost

What they mean

• Nitrogen recovery rate: the proportion of nitrogen effectively separated from raw air 
• Air/N₂ ratio: the volume of compressed air consumed to generate 1 Nm³ of nitrogen

Why it matters

Higher recovery rate and lower air/N₂ ratio mean less compressed air waste, lower air compressor load, and significantly reduced long-term electricity costs.

Reference data (at 99% purity)

 

Parameter	Value
Nitrogen recovery rate	48%–50%
Air/N₂ ratio	2.5–2.6

 

Even under ultra-high purity (99.999%) conditions, SLCMS-UEP maintains:

• Nitrogen recovery rate: 26%
• Air/N₂ ratio: 4.9

These figures significantly exceed conventional industry standards, greatly reducing energy consumption for high-purity nitrogen production.

 

3. Crush Strength — Determines Service Life & System Stability

What it means

The ability of CMS particles to withstand repeated mechanical impact and airflow stress during PSA pressurization/depressurization cycles.

Why it matters

Insufficient crush strength leads to:

• Particle pulverization → blocked airflow channels
• Increased system pressure drop
• Reduced nitrogen generation efficiency
• Potential secondary damage to equipment

Reference data

 

Parameter	SHANLI Value	Typical Industry Level
Crush strength	≥38N	Usually below 30N

 

 

4. Ash Content — Affects Performance Decay & Maintenance Intervals

What it means

Residual impurities generated during CMS manufacturing.

Why it matters: 

Excessively high ash content leads to:

• Blockage of CMS micropores → gradual adsorption performance loss
• Contamination of downstream pipelines and equipment after pulverization

Reference data

 

Parameter	SHANLI Value
Ash content	≤5.0%

 

Strict impurity control protects the microporous structure, maintains stable adsorption performance, and extends equipment maintenance cycles.

 

5. Bulk Density & Particle Size — Affect Filling Quality & Airflow Distribution

What they mean

• Bulk density: mass of CMS per unit volume (g/mL) 
• Particle size: dimension of CMS particles (mm)

Why it matters

• Uniform particle size → prevents bridging or voids during filling → avoids local airflow short-circuiting 
• Moderate bulk density → ensures sufficient adsorption capacity while avoiding filling difficulties or excessive pressure drop

 Reference data

 

Model	Particle Size	Bulk Density (g/mL)
SLCMS series	0.9mm(customizable)	0.650–0.690
SLUHP-100	1.0–1.2mm	0.650–0.690

 

Uniform particle distribution and optimized bulk density ensure dense filling and stable internal airflow.

 

 

Conclusion: How to Properly Evaluate Carbon Molecular Sieve Quality?

CMS quality evaluation is never a comparison of single parameters, but a comprehensive assessment of performance, stability, and operating condition compatibility.

 

Evaluation Dimension	Key Parameters	Focus Area
Performance	Nitrogen productivity, recovery rate, air/N₂ ratio	Output efficiency & energy consumption
Life & Stability	Crush strength, ash content	No pulverization, no performance decay
Adaptability	Particle size, bulk density, filling method, storage	Equipment matching & operational convenience
Optimization Potential	Temperature adaptability	Headroom for further performance gains

 

Selection advice: Based on your actual nitrogen demand, site operating conditions, and long-term operating costs, comprehensively compare all parameters to select the most suitable CMS solution.

 

Not Sure Which CMS Model Fits Your System?

We offer professional selection guidance, filling optimization, operating parameter tuning, and lifetime technical support.